- 19%



- IEEE802.3af/at with max. power of 30W
- 2x RJ45 Gigabit Ports
- PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-)
- Internal power supply unit
- Compact design
- Incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protection
- Wall mounting capable

€37.05 tax excl.
€29.90 tax excl. €29.90 tax incl. Save 19 %

In stock


Intelligent power supply via network without switch

With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets.

For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling.

Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch.

The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt.

The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet.

Due to its compact design, the ALLNET ALL0488V6 can be installed very unobtrusively. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-).


Specific References


Fiche ALLNET ALL0488v6

Datasheet - French version

Download (2.08M)

Datasheet ALLNET ALL0488v6

Datasheet - English version

Download (2.08M)

You might also like

Customers who bought this product also bought: