Yealink EXP43
- 4.3" 272 x 480-pixel color screen - Color icons for rich visual experience - 20 physical keys on each page with dual-color LEDs - Three independent control keys with illuminated LED for fast switching pages...
- 4.3" 272 x 480-pixel color screen - Color icons for rich visual experience - 20 physical keys on each page with dual-color LEDs - Three independent control keys with illuminated LED for fast switching pages...
- 4.3" 272 x 480-pixel color screen - Color icons for rich visual experience - 20 physical keys on each page with dual-color LEDs - Three independent control keys with illuminated LED - Supports up to 3...
- 720p30 HD - 2 Megapixels
- 40 DSS buttons - Direct connected to KX-HDV230/ KX-HDV330/ KX-HDV430 - Maximum of 5 DSS console per phone can be connected
- IEEE802.3af/at with max. power of 30W - 2x RJ45 Gigabit Ports - PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) - Internal power supply unit - Compact design - Incl. 1.5m power cable with...
- An exclusive collection which quality and detailed designs - Rich visual experience with 160x320 graphic LCD - 20 physical keys each with a dual-color LED - 2 independent control keys are used for fast...
When device is provided without any Power Supply Unit, it is used to provide power, when in-line Power over Ethernet is not available.
- Easy to install , and designed exclusively for the Cisco SPA 500 Series IP Phones - 15 programmable buttons simplify dialing and call transfers - Page Left and Page Right keys allow configuration of up to 30...
- Easy to install , and designed exclusively for the Cisco SPA 500 Series IP Phones - 32 programmable buttons simplify dialing and call transfers - Multicolored LEDs monitor the status of each configured voice...
End Of Life - Last units - 1 month Warranty
When device is provided without any Power Supply Unit, it is used to provide power, when in-line Power over Ethernet is not available.
The Cisco IP Phone Power Cube (CP-PWR-CUBE) is used to supply power to the Cisco 7900 series IP phones. It is used to provide power to Cisco IP phones when in-line power over Ethernet is not available. IP&Go...